GNU LESSER GENERAL PUBLIC LICENSE ********************************* Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 59 Temple Place -- Suite 330, Boston, MA 02111-1307, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.] Preamble ======== The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This license, the Lesser General Public License, applies to some specially designated software--typically libraries--of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular case, based on the explanations below. When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish); that you receive source code or can get it if you want it; that you can change the software and use pieces of it in new free programs; and that you are informed that you can do these things. To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it. For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the library, you must provide complete object files to the recipients, so that they can relink them with the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights. We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute and/or modify the library. To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed on, the recipients should know that what they have is not the original version, so that the original author's reputation will not be affected by problems that might be introduced by others. Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license. Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary General Public License. We use this license for certain libraries in order to permit linking those libraries into non-free programs. When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library. We call this license the "Lesser" General Public License because it does _Less_ to protect the user's freedom than the ordinary General Public License. It also provides other free software developers Less of an advantage over competing non-free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries. However, the Lesser license provides advantages in certain special circumstances. For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License. In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software. For example, permission to use the GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system. Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library. The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a "work based on the library" and a "work that uses the library". The former contains code derived from the library, whereas the latter must be combined with the library in order to run. GNU LESSER GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called "this License"). Each licensee is addressed as "you". A "library" means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables. The "Library", below, refers to any such software library or work which has been distributed under these terms. A "work based on the Library" means either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term "modification".) "Source code" for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library. Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does. 1. You may copy and distribute verbatim copies of the Library's complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a. The modified work must itself be a software library. b. You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change. c. You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License. d. If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and performs whatever part of its purpose remains meaningful. (For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library. In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices. Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy. This option is useful when you wish to copy part of the code of the Library into a program that is not a library. 4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange. If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code. 5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a "work that uses the Library". Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License. However, linking a "work that uses the Library" with the Library creates an executable that is a derivative of the Library (because it contains portions of the Library), rather than a "work that uses the library". The executable is therefore covered by this License. Section 6 states terms for distribution of such executables. When a "work that uses the Library" uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law. If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under Section 6.) Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the Library itself. 6. As an exception to the Sections above, you may also combine or link a "work that uses the Library" with the Library to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer's own use and reverse engineering for debugging such modifications. You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things: a. Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine-readable "work that uses the Library", as object code and/or source code, so that the user can modify the Library and then relink to produce a modified executable containing the modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions.) b. Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run time a copy of the library already present on the user's computer system, rather than copying library functions into the executable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as the modified version is interface-compatible with the version that the work was made with. c. Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution. d. If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place. e. Verify that the user has already received a copy of these materials or that you have already sent this user a copy. For an executable, the required form of the "work that uses the Library" must include any data and utility programs needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute. 7. You may place library facilities that are a work based on the Library side-by-side in a single library together with other library facilities not covered by this License, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things: a. Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed under the terms of the Sections above. b. Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the accompanying uncombined form of the same work. 8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or works based on it. 10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties with this License. 11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Library does not specify a license version number, you may choose any version ever published by the Free Software Foundation. 14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Libraries ============================================== If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License). To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. ONE LINE TO GIVE THE LIBRARY'S NAME AND AN IDEA OF WHAT IT DOES. Copyright (C) YEAR NAME OF AUTHOR This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. Also add information on how to contact you by electronic and paper mail. You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the library, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob' (a library for tweaking knobs) written by James Random Hacker. SIGNATURE OF TY COON, 1 April 1990 Ty Coon, President of Vice That's all there is to it! Pieces of the manual in transit ******************************* * Menu: * Installing binary:: Installing a MySQL Binary Distribution * Perl support:: Perl Installation Comments * Group by functions:: Functions for Use with `GROUP BY' Clauses Installing a MySQL Binary Distribution ====================================== * Menu: * Linux-RPM:: Linux RPM files * Building clients:: Building client programs You need the following tools to install a MySQL binary distribution: * GNU `gunzip' to uncompress the distribution. * A reasonable `tar' to unpack the distribution. GNU `tar' is known to work. Sun `tar' is known to have problems. An alternative installation method under Linux is to use RPM (RedHat Package Manager) distributions. *Note Linux-RPM::. If you run into problems, *PLEASE ALWAYS USE* `mysqlbug' when posting questions to . Even if the problem isn't a bug, `mysqlbug' gathers system information that will help others solve your problem. By not using `mysqlbug', you lessen the likelihood of getting a solution to your problem! You will find `mysqlbug' in the `bin' directory after you unpack the distribution. *Note Bug reports::. The basic commands you must execute to install and use a MySQL binary distribution are: shell> groupadd mysql shell> useradd -g mysql mysql shell> cd /usr/local shell> gunzip < /path/to/mysql-VERSION-OS.tar.gz | tar xvf - shell> ln -s mysql-VERSION-OS mysql shell> cd mysql shell> scripts/mysql_install_db shell> chown -R root /usr/local/mysql shell> chown -R mysql /usr/local/mysql/data shell> chgrp -R mysql /usr/local/mysql shell> chown -R root /usr/local/mysql/bin shell> bin/safe_mysqld --user=mysql & You can add new users using the `bin/mysql_setpermission' script if you install the `DBI' and `Msql-Mysql-modules' Perl modules. A more detailed description follows. To install a binary distribution, follow the steps below, then proceed to *Note Post-installation::, for post-installation setup and testing: 1. Pick the directory under which you want to unpack the distribution, and move into it. In the example below, we unpack the distribution under `/usr/local' and create a directory `/usr/local/mysql' into which MySQL is installed. (The following instructions therefore assume you have permission to create files in `/usr/local'. If that directory is protected, you will need to perform the installation as `root'.) 2. Obtain a distribution file from one of the sites listed in *Note Getting MySQL: Getting MySQL. MySQL binary distributions are provided as compressed `tar' archives and have names like `mysql-VERSION-OS.tar.gz', where `VERSION' is a number (for example, `3.21.15'), and `OS' indicates the type of operating system for which the distribution is intended (for example, `pc-linux-gnu-i586'). 3. If you see a binary distribution marked with the `-max' prefix, this means that the binary has support for transaction-safe tables and other features. *Note `mysqld-max': mysqld-max. Note that all binaries are built from the same MySQL source distribution. 4. Add a user and group for `mysqld' to run as: shell> groupadd mysql shell> useradd -g mysql mysql These commands add the `mysql' group and the `mysql' user. The syntax for `useradd' and `groupadd' may differ slightly on different versions of Unix. They may also be called `adduser' and `addgroup'. You may wish to call the user and group something else instead of `mysql'. 5. Change into the intended installation directory: shell> cd /usr/local 6. Unpack the distribution and create the installation directory: shell> gunzip < /path/to/mysql-VERSION-OS.tar.gz | tar xvf - shell> ln -s mysql-VERSION-OS mysql The first command creates a directory named `mysql-VERSION-OS'. The second command makes a symbolic link to that directory. This lets you refer more easily to the installation directory as `/usr/local/mysql'. 7. Change into the installation directory: shell> cd mysql You will find several files and subdirectories in the `mysql' directory. The most important for installation purposes are the `bin' and `scripts' subdirectories. `bin' This directory contains client programs and the server You should add the full pathname of this directory to your `PATH' environment variable so that your shell finds the MySQL programs properly. *Note Environment variables::. `scripts' This directory contains the `mysql_install_db' script used to initialize the `mysql' database containing the grant tables that store the server access permissions. 8. If you would like to use `mysqlaccess' and have the MySQL distribution in some non-standard place, you must change the location where `mysqlaccess' expects to find the `mysql' client. Edit the `bin/mysqlaccess' script at approximately line 18. Search for a line that looks like this: $MYSQL = '/usr/local/bin/mysql'; # path to mysql executable Change the path to reflect the location where `mysql' actually is stored on your system. If you do not do this, you will get a `Broken pipe' error when you run `mysqlaccess'. 9. Create the MySQL grant tables (necessary only if you haven't installed MySQL before): shell> scripts/mysql_install_db Note that MySQL versions older than Version 3.22.10 started the MySQL server when you run `mysql_install_db'. This is no longer true! 10. Change ownership of binaries to `root' and ownership of the data directory to the user that you will run `mysqld' as: shell> chown -R root /usr/local/mysql shell> chown -R mysql /usr/local/mysql/data shell> chgrp -R mysql /usr/local/mysql The first command changes the `owner' attribute of the files to the `root' user, the second one changes the `owner' attribute of the data directory to the `mysql' user, and the third one changes the `group' attribute to the `mysql' group. 11. If you want to install support for the Perl `DBI'/`DBD' interface, see *Note Perl support::. 12. If you would like MySQL to start automatically when you boot your machine, you can copy `support-files/mysql.server' to the location where your system has its startup files. More information can be found in the `support-files/mysql.server' script itself and in *Note Automatic start::. After everything has been unpacked and installed, you should initialize and test your distribution. You can start the MySQL server with the following command: shell> bin/safe_mysqld --user=mysql & *Note `safe_mysqld': safe_mysqld. *Note Post-installation::. Perl Installation Comments ========================== * Menu: * Perl installation:: Installing Perl on Unix * ActiveState Perl:: Installing ActiveState Perl on Windows * Windows Perl:: Installing the MySQL Perl distribution on Windows * Perl support problems:: Problems using the Perl `DBI'/`DBD' interface Installing Perl on Unix ----------------------- Perl support for MySQL is provided by means of the `DBI'/`DBD' client interface. *Note Perl::. The Perl `DBD'/`DBI' client code requires Perl Version 5.004 or later. The interface *will not work* if you have an older version of Perl. MySQL Perl support also requires that you've installed MySQL client programming support. If you installed MySQL from RPM files, client programs are in the client RPM, but client programming support is in the developer RPM. Make sure you've installed the latter RPM. As of Version 3.22.8, Perl support is distributed separately from the main MySQL distribution. If you want to install Perl support, the files you will need can be obtained from `http://www.mysql.com/Downloads/Contrib/'. The Perl distributions are provided as compressed `tar' archives and have names like `MODULE-VERSION.tar.gz', where `MODULE' is the module name and `VERSION' is the version number. You should get the `Data-Dumper', `DBI', and `Msql-Mysql-modules' distributions and install them in that order. The installation procedure is shown below. The example shown is for the `Data-Dumper' module, but the procedure is the same for all three distributions: 1. Unpack the distribution into the current directory: shell> gunzip < Data-Dumper-VERSION.tar.gz | tar xvf - This command creates a directory named `Data-Dumper-VERSION'. 2. Change into the top-level directory of the unpacked distribution: shell> cd Data-Dumper-VERSION 3. Build the distribution and compile everything: shell> perl Makefile.PL shell> make shell> make test shell> make install The `make test' command is important because it verifies that the module is working. Note that when you run that command during the `Msql-Mysql-modules' installation to exercise the interface code, the MySQL server must be running or the test will fail. It is a good idea to rebuild and reinstall the `Msql-Mysql-modules' distribution whenever you install a new release of MySQL, particularly if you notice symptoms such as all your `DBI' scripts dumping core after you upgrade MySQL. If you don't have the right to install Perl modules in the system directory or if you to install local Perl modules, the following reference may help you: `http://www.iserver.com/support/contrib/perl5/modules.html' Look under the heading `Installing New Modules that Require Locally Installed Modules'. Installing ActiveState Perl on Windows -------------------------------------- To install the MySQL `DBD' module with ActiveState Perl on Windows, you should do the following: * Get ActiveState Perl from `http://www.activestate.com/Products/ActivePerl/index.html' and install it. * Open a DOS shell. * If required, set the HTTP_proxy variable. For example, you might try: set HTTP_proxy=my.proxy.com:3128 * Start the PPM program: C:\> c:\perl\bin\ppm.pl * If you have not already done so, install `DBI': ppm> install DBI * If this succeeds, run the following command: install ftp://ftp.de.uu.net/pub/CPAN/authors/id/JWIED/DBD-mysql-1.2212.x86.ppd The above should work at least with ActiveState Perl Version 5.6. If you can't get the above to work, you should instead install the *MyODBC* driver and connect to MySQL server through ODBC: use DBI; $dbh= DBI->connect("DBI:ODBC:$dsn","$user","$password") || die "Got error $DBI::errstr when connecting to $dsn\n"; Installing the MySQL Perl Distribution on Windows ------------------------------------------------- The MySQL Perl distribution contains `DBI', `DBD:MySQL' and `DBD:ODBC'. * Get the Perl distribution for Windows from `http://www.mysql.com/download.html'. * Unzip the distribution in `C:' so that you get a `C:\PERL' directory. * Add the directory `C:\PERL\BIN' to your path. * Add the directory `C:\PERL\BIN\MSWIN32-x86-thread' or `C:\PERL\BIN\MSWIN32-x86' to your path. * Test that `perl' works by executing `perl -v' in a DOS shell. Problems Using the Perl `DBI'/`DBD' Interface --------------------------------------------- If Perl reports that it can't find the `../mysql/mysql.so' module, then the problem is probably that Perl can't locate the shared library `libmysqlclient.so'. You can fix this by any of the following methods: * Compile the `Msql-Mysql-modules' distribution with `perl Makefile.PL -static -config' rather than `perl Makefile.PL'. * Copy `libmysqlclient.so' to the directory where your other shared libraries are located (probably `/usr/lib' or `/lib'). * On Linux you can add the pathname of the directory where `libmysqlclient.so' is located to the `/etc/ld.so.conf' file. * Add the pathname of the directory where `libmysqlclient.so' is located to the `LD_RUN_PATH' environment variable. If you get the following errors from `DBD-mysql', you are probably using `gcc' (or using an old binary compiled with `gcc'): /usr/bin/perl: can't resolve symbol '__moddi3' /usr/bin/perl: can't resolve symbol '__divdi3' Add `-L/usr/lib/gcc-lib/... -lgcc' to the link command when the `mysql.so' library gets built (check the output from `make' for `mysql.so' when you compile the Perl client). The `-L' option should specify the pathname of the directory where `libgcc.a' is located on your system. Another cause of this problem may be that Perl and MySQL aren't both compiled with `gcc'. In this case, you can solve the mismatch by compiling both with `gcc'. If you get the following error from `Msql-Mysql-modules' when you run the tests: t/00base............install_driver(mysql) failed: Can't load '../blib/arch/auto/DBD/mysql/mysql.so' for module DBD::mysql: ../blib/arch/auto/DBD/mysql/mysql.so: undefined symbol: uncompress at /usr/lib/perl5/5.00503/i586-linux/DynaLoader.pm line 169. it means that you need to include the compression library, -lz, to the link line. This can be doing the following change in the file `lib/DBD/mysql/Install.pm': $sysliblist .= " -lm"; to $sysliblist .= " -lm -lz"; After this, you MUST run 'make realclean' and then proceed with the installation from the beginning. If you want to use the Perl module on a system that doesn't support dynamic linking (like SCO) you can generate a static version of Perl that includes `DBI' and `DBD-mysql'. The way this works is that you generate a version of Perl with the `DBI' code linked in and install it on top of your current Perl. Then you use that to build a version of Perl that additionally has the `DBD' code linked in, and install that. On SCO, you must have the following environment variables set: shell> LD_LIBRARY_PATH=/lib:/usr/lib:/usr/local/lib:/usr/progressive/lib or shell> LD_LIBRARY_PATH=/usr/lib:/lib:/usr/local/lib:/usr/ccs/lib:/usr/progressive/lib:/usr/skunk/lib shell> LIBPATH=/usr/lib:/lib:/usr/local/lib:/usr/ccs/lib:/usr/progressive/lib:/usr/skunk/lib shell> MANPATH=scohelp:/usr/man:/usr/local1/man:/usr/local/man:/usr/skunk/man: First, create a Perl that includes a statically linked `DBI' by running these commands in the directory where your `DBI' distribution is located: shell> perl Makefile.PL -static -config shell> make shell> make install shell> make perl Then you must install the new Perl. The output of `make perl' will indicate the exact `make' command you will need to execute to perform the installation. On SCO, this is `make -f Makefile.aperl inst_perl MAP_TARGET=perl'. Next, use the just-created Perl to create another Perl that also includes a statically-linked `DBD::mysql' by running these commands in the directory where your `Msql-Mysql-modules' distribution is located: shell> perl Makefile.PL -static -config shell> make shell> make install shell> make perl Finally, you should install this new Perl. Again, the output of `make perl' indicates the command to use. Functions for Use with `GROUP BY' Clauses ========================================= If you use a group function in a statement containing no `GROUP BY' clause, it is equivalent to grouping on all rows. `COUNT(expr)' Returns a count of the number of non-`NULL' values in the rows retrieved by a `SELECT' statement: mysql> select student.student_name,COUNT(*) from student,course where student.student_id=course.student_id GROUP BY student_name; `COUNT(*)' is somewhat different in that it returns a count of the number of rows retrieved, whether or not they contain `NULL' values. `COUNT(*)' is optimized to return very quickly if the `SELECT' retrieves from one table, no other columns are retrieved, and there is no `WHERE' clause. For example: mysql> select COUNT(*) from student; `COUNT(DISTINCT expr,[expr...])' Returns a count of the number of different non-`NULL' values: mysql> select COUNT(DISTINCT results) from student; In MySQL you can get the number of distinct expression combinations that don't contain NULL by giving a list of expressions. In ANSI SQL you would have to do a concatenation of all expressions inside `CODE(DISTINCT ..)'. `AVG(expr)' Returns the average value of `expr': mysql> select student_name, AVG(test_score) from student GROUP BY student_name; `MIN(expr)' `MAX(expr)' Returns the minimum or maximum value of `expr'. `MIN()' and `MAX()' may take a string argument; in such cases they return the minimum or maximum string value. *Note MySQL indexes::. mysql> select student_name, MIN(test_score), MAX(test_score) from student GROUP BY student_name; `SUM(expr)' Returns the sum of `expr'. Note that if the return set has no rows, it returns NULL! `STD(expr)' `STDDEV(expr)' Returns the standard deviation of `expr'. This is an extension to ANSI SQL. The `STDDEV()' form of this function is provided for Oracle compatibility. `BIT_OR(expr)' Returns the bitwise `OR' of all bits in `expr'. The calculation is performed with 64-bit (`BIGINT') precision. `BIT_AND(expr)' Returns the bitwise `AND' of all bits in `expr'. The calculation is performed with 64-bit (`BIGINT') precision. MySQL has extended the use of `GROUP BY'. You can use columns or calculations in the `SELECT' expressions that don't appear in the `GROUP BY' part. This stands for _any possible value for this group_. You can use this to get better performance by avoiding sorting and grouping on unnecessary items. For example, you don't need to group on `customer.name' in the following query: mysql> select order.custid,customer.name,max(payments) from order,customer where order.custid = customer.custid GROUP BY order.custid; In ANSI SQL, you would have to add `customer.name' to the `GROUP BY' clause. In MySQL, the name is redundant if you don't run in ANSI mode. *Don't use this feature* if the columns you omit from the `GROUP BY' part aren't unique in the group! You will get unpredictable results. In some cases, you can use `MIN()' and `MAX()' to obtain a specific column value even if it isn't unique. The following gives the value of `column' from the row containing the smallest value in the `sort' column: substr(MIN(concat(rpad(sort,6,' '),column)),7) *Note example-Maximum-column-group-row::. Note that if you are using MySQL Version 3.22 (or earlier) or if you are trying to follow ANSI SQL, you can't use expressions in `GROUP BY' or `ORDER BY' clauses. You can work around this limitation by using an alias for the expression: mysql> SELECT id,FLOOR(value/100) AS val FROM tbl_name GROUP BY id,val ORDER BY val; In MySQL Version 3.23 you can do: mysql> SELECT id,FLOOR(value/100) FROM tbl_name ORDER BY RAND();